Shenzhen PioCreat 3D Technology Co., Ltd.

简体中文

News
News

Industry 3D printing equipment

Characteristics of piocreat ordinary rigid resin PC-Rigid

2022/01/07

PC-Rigid, a standard rigid resin for LCD/DLP light-curing 3D printers, is mainly suitable for animation, teaching aids, toys, handicrafts, industrial parts and other fields. The main characteristics of standard rigid resin include high cost performance, high precision, wide compatibility, good fluidity, smooth surface of the finished product, and short curing time.


Standard rigid resin has high printing accuracy, printing animation models, and excellent detail texture presentation; good mobility, high printing success rate; rich colors, as many as 14 colors, to meet customer demand for colors; wide compatibility, suitable for mainstream market LCD/DLP 3D printer.

Low viscosity and good fluidity:

The resin has good fluidity, which can quickly infiltrate the model and cure it, improve the success rate of model printing, reduce the resin release force and adhesion, improve the printing accuracy, and it is easy to clean the model.

High printing accuracy:

Low shrinkage, stable printing size and high printing accuracy. The model has fine texture, smooth surface and fine details.

Fast printing speed:

The resin ensures the strength of the model and does not shrink excessively, improves the printing speed, shortens the curing time, and improves the printing efficiency of the LCD machine as much as possible.

Various colors:

A variety of colors, there is always one for you
White, skin color, black, gray, green, yellow, orange, red, blue, gray
Transparent green, transparent red, transparent blue, transparent purple, transparent color, etc.
Note: the specific color shall be subject to the real object.

Matters needing attention:
1. This product is disposable and cannot be reused.
2. This material must not come into contact with eyes, skin or clothes, and must not be tasted or ingested. Only use under good ventilation. Please pay attention to air circulation and take protective measures. Clean thoroughly after operation.
3. The product is liquid and has a slight smell. Please wear a mask when using it to avoid infection caused by inhalation of aerosol.
4. The product shall be stored in sealed containers, sealed in time after use, and as for dry and ventilated places, it shall not be exposed to the sun.
5. In case of accidental inhalation, leave the site and seek medical treatment in time.
6. In case of accidental contact with the skin, wash the skin thoroughly with soapy water and clear water or see a doctor.
7. If you accidentally touch your eyes, open your eyelids immediately, rinse with soapy water for about 20 minutes and get medical attention in time.
8. If swallowed accidentally, do not induce vomiting, keep at rest and seek medical attention in time.
9. The waste shall be disposed according to the requirements of local environmental regulations.
Storage method: Please store the product in a dry and ventilated place, indoor without corrosive gas, and not in a sunny and humid place. The shelf life is 1 year.
RECOMMENDED PRODUCTS