Carbon fiber PC+20% CF/high fluidity/halogen-free flame retardant/excellent mechanical properties
Product name: PC carbon fiber conductive
Material: PC carbon fiber
Surface resistivity: 10E2 - 10E5 Ω
Color: black
Molding process: injection molding
Use: tweezers, camera shell, electrical shell, electronic parts
Carbon fiber PC+20% CF/high fluidity/halogen-free flame retardant/excellent mechanical properties
performance



It conforms to ROHS and SGS standards. Adding PS to PC can reduce the viscous flow activation energy of PC, thus improving the processing fluidity of PC. Adding a small amount of PS can greatly reduce the viscosity of PC melt. PS can also act as a rigid organic filler in PC. PC and PS are transparent materials, and their refractive ratios are very close. Therefore, PC/PS alloys are transparent and have good optical properties. It is an amorphous thermoplastic, with excellent heat resistance, good transparency, high impact strength and other physical and mechanical properties. Molding processability: ordinary equipment injection or extrusion. Polycarbonate can be divided into aliphatic group and aromatic group according to different alcohol structures. However, due to its biocompatibility and biodegradability, it can be used in drug delivery carriers, surgical sutures, bone support materials, etc. PC is an amorphous polymer in almost colorless glass state, with good optical properties. PC high molecular weight resin has high toughness. The notch impact strength of cantilever beam is 600~900J/m, and the thermal deformation temperature of unfilled brand is about 130 ° C. This value can be increased by 10 ° C after glass fiber reinforcement. The bending modulus of PC can reach more than 2400MPa, and the resin can be processed into large rigid products. The creep rate under load is very low below 100 ° C. PC has poor hydrolysis resistance and cannot be used for products repeatedly exposed to high-pressure steam.

(1) It has high strength and elastic coefficient, high impact strength and wide range of application temperature;
(2) Highly transparent and free staining;
(3) H.D.T. high;
(4) Good fatigue resistance;
(5) Good weather resistance;
(6) Excellent electrical characteristics
(7) Odorless and tasteless, harmless to human body, in line with health and safety;
(8) Low forming shrinkage and good dimensional stability.