PioNext Mini and PioNext Ultra Daily Cleaning

Oct 17, 2026

Cleaning process after successful printing

• Sequence Note: The platform must be removed first. If the material trough is removed first, the excess resin on the molding platform and the model will drip onto the printing screen, which may lead to contamination of the printing screen and seepage into the machine, damaging the machine.

• After printing is completed, you can first wait for 3-5 minutes for the excess resin on the build platform and the model to drip off, then remove the print platform for cleaning, and finally process the resin tank.

Clean the build platform

• Use a metal spatula to scrape the model off.

• Check if there are any residual cured resin debris on the printing platform, and use a metal spatula to repeatedly scrape the platform surface until there is no residual cured resin debris on the printing platform.

• Thoroughly wipe the platform surface clean with 95% industrial alcohol and lint-free cloth, then blow dry with an air gun. Ensure there are no protruding cured residues to prevent damage to the release film or LCD printing screen during the next printing.

Clean the feed trough

• After resin recovery, first use a spray bottle filled with 95% industrial alcohol to spray and clean the trough and release film until there is no obvious resin or alcohol-resin mixture residue on the surface of the trough and release film, then use a clean dust-free cloth to wipe off the excess liquid on the inner wall of the trough and the release film.

• Check for obvious liquid residue by viewing under light. If there is obvious reflection on the surface or a sticky feeling, it is resin or a mixture of resin and alcohol. Continue to spray and clean with a spray bottle filled with 95% industrial alcohol, then wipe until the surfaces of the material tank and release film are clean, free of resin or the mixture of resin and alcohol.

Deep cleaning and inspection after print failure

First remove the model, then clean the build platform.

If printing fails, thorough cleaning must be performed.

• Using the "Clear Screen" function: Through full-screen exposure, a complete layer of cured resin sheet is formed on the release film, facilitating the attachment of residual cured resin debris to the cured resin sheet for one-time removal.

• Operation: In the printer menu, find "Settings" > "Clear Screen", and set the exposure time (usually 30 seconds).

• After exposure, you can first use a paper funnel to filter and recycle the resin into the resin bottle, and then carefully lift the entire cured layer from the edge with a plastic spatula.

Clean the feed trough

• After resin recovery, first use a spray bottle filled with 95% industrial alcohol to spray and clean the trough and release film until there is no obvious resin or alcohol-resin mixture residue on the surface of the trough and release film, then use a clean dust-free cloth to wipe off the excess liquid on the inner wall of the trough and the release film.

• Check for obvious liquid residue by viewing under light. If there is obvious reflection on the surface or a sticky feeling, it is resin or a mixture of resin and alcohol. Continue to spray and clean with a spray bottle filled with 95% industrial alcohol, then wipe until the surfaces of the material tank and release film are clean, free of resin or the mixture of resin and alcohol.

• Print Screen Cleaning and Inspection: After removing the build platform and material tank, check the condition of the print screen.

• Initial inspection: Observe whether there is resin residue on the surface of the print screen. If there is resin residue on the print screen, it indicates resin leakage. It is necessary to check the assembly of the material tank and the release film, whether the release film is damaged, and whether the release film needs to be replaced subsequently.

• Cleaning: Use a lint-free cloth dampened with 95% industrial alcohol to wipe the surface of the printing screen, ensuring that there is no cured resin or other impurities such as hair and dust on the surface of the printing screen. After wiping, use a dry lint-free cloth to dry the cleaned surface.

• Print Screen Function Check: After cleaning the print screen

• Place a blank A4 sheet of paper above the print screen.

• Operation: Find Settings > Clear Screen in the printer menu. Observe the status of the print screen, and confirm whether there are black spots on the print screen. If there are black spots, it indicates that this print has failed and damaged the print screen. The print screen needs to be replaced.

• Operation: In the printer menu, select Print, then randomly select a print file for blank printing. Observe whether the print outline displayed on the print screen matches the outline in the slicing software. If there are abnormal black spots, wire arrangements, or light leakage, it indicates that this print has failed and damaged the print screen. The print screen needs to be replaced.

Inspection after cleaning

1. Printing platform: Observe by light and feel with hands (wear nitrile gloves) the surface of the molding platform to confirm there is no residual cured resin. If there is, please repeat the operation of cleaning the molding platform.

2. Release Film: Check for any visible damage, perforation, deep scratches (usually referring to scratches that affect the flatness of the film surface), or obvious looseness. If any are found, the release film must be replaced.

3. Printing Screen: Ensure that the surface of the printing screen is free of cured resin or other impurities such as hair and dust.