Standards for Printing Environment Maintenance
|
Environmental Dimension |
Standard Requirements |
Cause and Effect |
Notes |
|---|---|---|---|
|
Temperature |
Constant temperature: 23-25°C |
affects the chemical reaction rate of the resin. Excessively low temperature (<20°C) will cause the resin to become viscous, slow down the chemical reaction rate, and easily lead to printing failure |
It is recommended to use a thermostatic air conditioner or related equipment. |
|
humidity |
Relative humidity: 40%-60% |
Excessive humidity (>70%) can easily cause the resin to absorb moisture, impair its curing performance, and lead to the model becoming sticky and brittle. |
It is recommended to use a dehumidifier during the humid season.Do not operate in obviously damp environments (e. g. wall surface condensation). |
|
Ventilation and Safety |
Independent and well-ventilated |
The volatile resin odor must be effectively discharged to avoid long-term inhalation. |
It is recommended to be equipped with an independent exhaust system or an activated carbon filtration system. Do not use such equipment in living quarters. |
Preparation and Management of Essential Tools
1. Safety Protection and Emergency Tools (Primary Guarantee)
|
Tool Name |
Specifications / Requirements |
Core Usage and Application Specifications |
|---|---|---|
|
Nitrile gloves |
Chemical resistant, medium-thick profile |
Wear protective gear at all times when handling resin. Replace immediately if damaged. |
|
Goggles |
Splash-proof design |
Wear it when pouring resin and cleaning to prevent accidental splashing of liquid into your eyes. |
|
lint-free cloth, non-woven fabric, paper towel |
Excellent liquid absorption |
For quick handling of small-area resin spills. |
|
industrial alcohol |
95% concentration |
Used for cleaning troughs, forming platforms, cleaning models, etc. |
2. Routine Maintenance and Operation Tools (Core Kit)
|
Tool Category |
Tool Name |
Specifications / Requirements |
Core Usage and Application Specifications |
|---|---|---|---|
|
resin treatment |
filter funnel |
disposable |
Recycle resin must be used each time to filter cured debris. |
|
resin mixing tool |
Made of plastic or silicone |
It is used to gently stir the resin in the trough to prevent the release film from being scratched and damaged. |
|
|
cleaning tools |
industrial alcohol |
Concentration: 95% |
It is used to clean platforms and troughs. |
|
lint-free cloth |
Lint-free, brand-new and dedicated |
Clean with alcohol for best results. |
|
|
air gun |
industrial air gun |
Used to clean surface dust and dry the surface during cleaning. |
|
|
metal scraper |
Included with the printer |
Used to remove the modelfrom the platform. |
|
|
plastic scraper |
Included with the printer |
Used for stirring resin and cleaning debris off the release film. |
|
|
Leveling and Accuracy |
Leveling card / A4 paper |
Standard printing paper |
Used for platform leveling. |
|
Hex key set |
Included with the printer |
Used to lock the platform screws during leveling, or tighten other components of the machine. |
3. In-depth Maintenance and Diagnostic Tools (Advanced Preparation)
|
Tool Name |
Specifications / Requirements |
Core Usage and Application Specifications |
|---|---|---|
|
UV irradiator |
/ |
Optional. Regularly test the ultraviolet light output intensity of the LCD screen or UV light source to quantitatively determine the degree of aging. |
|
grease |
White synthetic lithium grease |
Used to lubricate the Z-axis lead screw on a quarterly basiswith a very small amount of lubricant. |
Tool Management and Workspace Organization
1. Zoned storage: The workspace shall be clearly divided into "clean area"(for storing printed models and clean tools), "printer placement area"(where the printer is located) and "contamination disposal area"(for cleaning, curing, trash cans, etc.).
2. Tool Status Check: Inspect tool integrity on a weekly basis to ensure that:
1. Protective equipment (gloves, goggles) is free from damage.
2. The cleaning cloth must be free of hardened cured resin; otherwise, it shall be replaced immediately.
3. Metal tools (such as wrenches) shall be kept dry and free from rust to prevent contamination or damage to the equipment.
3. Consumable Replenishment: Establish a minimum inventory warning mechanism. For high-frequency consumables such as filter funnels, nitrile gloves, lint-free cloths, and industrial alcohol, avoid procuring them only when they are completely exhausted.
