ABS resin (pc-abs) has the characteristics of high hardness, high toughness and impact resistance. The printed products can be drilled directly. It is mainly used in clocks, glasses, industrial parts, industrial handicrafts and other industries and fields.


The main characteristics of ABS like resin include the coexistence of rigidity and toughness, good fluidity, high precision, wide compatibility, strong impact resistance, smooth surface of finished products and short curing time. It has the physical properties of high hardness and toughness, can withstand a certain impact, can directly tap and drill holes on the finished products, can be used for the production of small batch finished products, and is compatible with most LCD / DLP printers.

Low viscosity and good fluidity:
The resin has good fluidity, which can quickly infiltrate the model and cure it, improve the success rate of model printing, reduce the resin release force and adhesion, improve the printing accuracy, and make it easier to clean the machine and model.

Coexistence of rigidity and toughness:
It has the physical properties of high hardness and toughness and can withstand certain impact.

Fast printing speed:
While the resin ensures the strength of the model and does not shrink excessively, it improves the printing speed, shortens the curing time, and improves the printing efficiency of the LCD machine as much as possible.

Rich colors and customizable:
A variety of colors, there is always one for you.
White, skin color, black, gray, green, yellow, orange, red, blue, gray.
Transparent green, transparent red, transparent blue, transparent purple, transparent color, etc.
Note: the specific color shall be subject to the real object.

matters needing attention:
1. This product is disposable and cannot be reused.
2. This material must not come into contact with eyes, skin or clothes, and must not be tasted or ingested. Only use under good ventilation. Please pay attention to air circulation and take protective measures. Clean thoroughly after operation.
3. The product is liquid and has a slight smell. Please wear a mask when using it to avoid infection caused by inhalation of aerosol.
4. The product shall be stored in sealed containers, sealed in time after use, and as for dry and ventilated places, it shall not be exposed to the sun.
5. In case of accidental inhalation, leave the site and seek medical treatment in time.
6. In case of accidental contact with the skin, wash the skin thoroughly with soapy water and clear water or see a doctor.
7. If you accidentally touch your eyes, open your eyelids immediately, rinse with soapy water for about 20 minutes and get medical attention in time.
8. If swallowed accidentally, do not induce vomiting, keep at rest and seek medical attention in time.
9. The waste shall be disposed according to the requirements of local environmental regulations.

Storage method:
Please store the product in a dry and ventilated place, indoor without corrosive gas, and not in a sunny and humid place. The shelf life is 1 year.