Soft characteristic
The physical property is similar to a rubber, the printed part can be folded in half for many times without breaking. Used for printing soft object.
Low viscosity and good liquidity
Elastic resin has good liquidity, can quickly infiltrate the model and solidify. In this way, it can promote the model printing success rate, reduce the resin release and adhesion force, improve the printing accuracy and make it easier to clean.
High printing speed
The resin can guarantee model hardness and no shrinkage at same time, increase the printing speed, decrease the exposure time and improving the printer efficiency as much as possible.
Application field
Make soft objects, such as animation models, watch straps, insoles, teaching models, etc.
Volume shrinkage | 3.35-5.65% |
linear shrinkage | 1.05-1.35% |
Tensile strength | 3.6MPa |
Tensile modulus | 6.8MPa |
Elongation at break | 60% |
Hardness Shore A |
40-60A
|
Viscosity | 300-650MPa |
Density | 1.05-1.1g/cm3 |
N.W. | 500g/1000g |
Package size | 220*100*100mm/290*110*110mm |